Xen Topaz Programming Manual 33
Program 10 to 11
PROGRAM 11: SYSTEM NUMBERING
11-02: E
XTENSION NUMBERING
Description
Use Program 11-02 : Extension Numbering to set the extension number. The extension number can be
up to four digits long. The first/second digit(s) of the number should be assigned in Program 11-01. This lets
an employee move to a new location (port) and retain the same extension number.
Input Data
Default
Conditions
None
Feature Cross Reference
♦ Department Calling
♦ Flexible System Numbering
♦ Intercom
Telephone Programming Instructions
To enter data for Program 11-02 (Extension Numbering):
1. Enter the programming mode.
2. Enter 11 02
3. Enter the number of the item you want to program.
4. Select the extension port number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Extension Port Number 01-96
Extension Number Description
Dial (up to 4 digits)
♦ Set up extension numbers for Key Tele-
phones, Single Line Telephones
♦ Extension number assignments cannot be
duplicated.
Extension Port Number Extension Number
1 200
： ：
96 295
11-02-01Ex Prt1
Extension No200
11-02-xxEx Prtxx
xxxxx
To Next Page
Loading...
