NEC Xen Topaz - Automatic System Reset Time

Program 40 to 92
Xen Topaz Programming Manual 316
PROGRAM 90: MAINTENANCE PROGRAM
90-09: A
UTOMATIC SYSTEM RESET TIME
Description
Use Program 90-09 : Automatic System Reset Time to define the time the system will automatically re-
set.
Input Data
Note 1. If the Month is set to “00” and Day has been set, the system will automatically be reset every month
of defined day.
Note 2. If the Day is set to “00” and the Time (Hour and Minute) has been set, the system will automatically
be reset every day of defined time.
Note 3. When all items are set to “00”, as is the default, the system will not automatically reset.
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-09 (Automatic System Reset Time Setup):
1. Enter the programming mode.
2. Enter 90 09
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item Input Data Default
Related
Program
90-09-01
Month 00-12(Note 1) 00
90-09-02
Day 00-31(Note 2) 00
90-09-03
Hour 00-23 00
90-09-04
Minute 00-59 00
90-09-01
SysReset Month0
90-09-xx
xxxxx