NEC Xen Topaz - SMDR Port Assignment for Department Groups

Program 26 to 35
Xen Topaz Programming Manual 261
PROGRAM 35: SMDR AND ACCOUNT CODE SETUP
35-04: SMDR P
ORT ASSIGNMENT FOR DEPARTMENT GROUPS
Description
Use Program 35-04 : SMDR Port Assignment for Department Groups to assign the SMDR port for each
Department Group.
Input Data
Conditions
None
Feature Cross Reference
♦ Station Message Detail Recording (SMDR)
Telephone Programming Instructions
To enter data for Program 35-04 (SMDR Port Assignment for Department Groups):
1. Enter the programming mode.
2. Enter 35 04
3. Enter the number of the item you want to program.
4. Select the Extension Group number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB COPY
Department Group No. SMDR Port No. Default
Related
Program
1-32
1,2
1
35-04-01 Ex.Gr1
SMDR Port 1
35-04-xx Ex.Grxx
xxxxx