NEC Xen Topaz - Load Data

Program 40 to 92
Xen Topaz Programming Manual 311
PROGRAM 90: MAINTENANCE PROGRAM
90-04: L
OAD DATA
Description
Use Program 90-04 : Load Data to load the system data from the inserted Compact Flash Memory to the
SRAM and Flash ROM in the system.
Input Data
[Data Load] : Dial 1 and HOLD key (Press only HOLD key for cancel)
Conditions
System data will be loaded from the directory named “data” on the CompactFlash card inserted into the
EXIFU-A1 card.
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-04 (Load Data):
1. Enter the programming mode.
2. Enter 90 04
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
90-04-01
Load Data
90-04-xx
xxxxx