NEC Xen Topaz - Toll Restriction Class

Program 21 to 25
Xen Topaz Programming Manual 156
PROGRAM 21: OUTGOING CALL SETUP
21-05: T
OLL RESTRICTION CLASS
Description
Use Program 21-05 : Toll Restriction Class to set the system’s Toll Restriction classes (1-15).
Input Data
IN
SA
SB
Toll Restriction Class Number 1-15
Prog. No. Item Input Data Description
Related
Program
21-05-01
International Call
restriction table
0 : Not assigned
1 : Assigned
This option assigns/ unassigns the Inter-
national Call Restrict Table for the Toll
Restriction Class you are programming.
Enter International Call Restrict Table
data in Program 21-06-01.
21-06-01
21-05-02
International Call
permit code table
This option assigns/ unassigns the Inter-
national Call Permit Table for the Toll Re-
striction Class you are programming.
Enter International Call
Permit Table data in Program 21-06-02.
21-06-02
21-05-03
-Not used- - -
21-05-04
Maximum Number of
Digits Table Assign-
ment
0 : Disable
1 : Assigned for
table 1
2 : Assigned for
table 2
3 : Assigned for
table 3
4 : Assigned for
table 4
Select the table (defined in 21-06-03) to
be used to determine the maximum num-
ber of digits allowed for outgoing calls.
21-06-04
21-05-05
Common permit code
table
0 : Not assigned
1 : Assigned
It chooses whether the table set up by 21-
06-04 is referred to, or not referred to.
21-06-05
21-05-06
Common restriction
table
0 : Not assigned
1 : Assigned
It chooses whether the table set up by 21-
06-05 is referred to, or not referred to.
21-06-06
21-05-07
Permit code table
0 : Disable
1 : Assigned for
table 1
2 : Assigned for
table 2
3 : Assigned for
table 3
4 : Assigned for
table 4
Set the tables 1-4 when referring to the
table set up by 21-06-06.
21-06-07
21-05-08
Restriction table Set the tables 1-4 when referring to the
table set up by 21-06-07.
21-05-09
Restriction for com-
mon ABB dials
0 : Not restricted
1 : Following
restriction table
Use this option to enable/disable Toll Re-
striction for Common Abbreviated Dialling
numbers. If enabled, Common Abbrevi-
ated Dialling numbers have the same
restrictions as manually dialled numbers.