NEC Xen Topaz - Delete All Extension Number

Program 40 to 92
Xen Topaz Programming Manual 335
PROGRAM 92: COPY PROGRAM
92-02: Delete All Extension Number
Description
Use Program 92-02 : Delete All Extension Number to delete all extension numbers (PRG11-02,PRG11-
04), However, the extension number of first port is not deleted.
Input Data
[Ext No. Del YES:1] Press Dial 1 + HOLD Key.
(Only Press HOLD key is cancelled.)
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 92-02 (Delete All Extension Number):
1. Enter the programming mode.
2. Enter 92 02
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
92-02-01
Ext No. Del
92-02-xx
xxxxx