EasyManua.ls Logo

NEC Xen Topaz - Service Code Setup (for Setup;Entry)

NEC Xen Topaz
343 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Xen Topaz Programming Manual 42
Program 10 to 11
PROGRAM 11: SYSTEM NUMBERING
11-11: S
ERVICE CODE SETUP (FOR SETUP/ENTRY)
Description
Use Program 11-11 : Service Code Setup (for Setup/Entry Operation) to customize the Service Codes
which are used for registration and setup. You can customize additional Service Codes in Programs 11-10,
11-12, 11-15 and 11-16. The following chart shows:
The number of each code (01-)
The function of the Service Code.
What type of telephones can use the Service Code
The code’s default entry. For example, dialling 825 (item 18) allows users to turn on or turn off Background
Music.
Programs that may be affected with the changing the code.
Input Data
IN
SA
SB
Prog. No. Item Terminals Default
Related
Program
11-11-01
Call Forward – Immediate
KTS,SLT
848
11-11-02
Call Forward – Busy
KTS,SLT
843
11-11-03
Call Forward – No Answer
KTS,SLT
845
11-11-04
Call Forward – Busy/ No Answer
KTS,SLT
844
11-11-05
Call Forward – Dual Ring
KTS,SLT
842
11-11-06
Call Forward – Select Option
KTS,SLT
888
11-11-07
Call Forward – Follow me
KTS,SLT
846
11-11-08
Do Not Disturb
KTS,SLT
847
11-11-09
Set/Answer Message Waiting
KTS,SLT
841
11-10-16
11-11-10
Cancel All Message Waiting
KTS,SLT
873
11-11-11
Cancel Message Waiting
KTS,SLT
871
11-11-12
Alarm Clock
KTS,SLT
827
20-01-06
11-11-13
Display Language Selection
KTS
778
15-02
11-11-14
Text Message Setting
KTS
836
11-11-15
Incoming Intercom Call mode setting (Voice)
KTS 821
20-09-05
20-02-12
11-11-16
Incoming Intercom Call mode setting (Signal)
KTS 823
20-09-05
20-02-12
11-11-17
Programmable Function Key Programming (Dialling
851 Service Code)
KTS 851
15-07
11-11-38
11-11-18
BGM On/Off
KTS 825
11-11-19
Key Touch Tone On/Off
KTS 824
11-11-20
-Not Used-
- -
11-11-21
-Not Used-
- -
11-11-22
Extension Name Programming
KTS 800
15-01
11-11-23
DID/DISA/DIL Override for Second call
KTS 779
11-11-24
Change Extension Class of Service
Allows an extension user to change the COS of an-
other extension. Must be allowed in Program20-13-
28.
KTS 777
20-13-28

Table of Contents

Other manuals for NEC Xen Topaz

Related product manuals