NEC Xen Topaz - External Paging Zones

Program 26 to 35
Xen Topaz Programming Manual 245
PROGRAM 31: EXTERNAL SPEAKER AND INTERNAL PAGING
31-04: E
XTERNAL PAGING ZONES
Description
Use Program 31-04 : External Paging Zone Group to assign each External Paging Speaker to an Exter-
nal Paging Zone. Users call the External Paging zone when broadcasting announcements to the external
zone. When programming, the zones on the PGDU are numbers 1-6, while the built-in speaker out is num-
ber 7.
Input Data
Conditions
Only External Speaker Numbers 1, 2 and 7 may be used.
Feature Cross Reference
♦ Paging, External
Telephone Programming Instructions
To enter data for Program 31-04 (External Paging Zone Group):
1. Enter the programming mode.
2. Enter 31 04
3. Enter the number of the item you want to program.
4. Select the External Speaker number to be Programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
External Speaker Number External Paging Zone No. Default
1-7 0-6 (0 : No setting)
Speaker 1 (2PGDU-1) : 2 (Zone 2)
Speaker 2 (2PGDU-1) : 3 (Zone 3)
Speaker 7 (in built) : 1 (Zone 1)
31-04-01 SPK 1
Paging Zone GP 1
31-04-xx SPK x
xxxxx