Program 16 to 20
Xen Topaz Programming Manual 121
PROGRAM 20: SYSTEM OPTION SETUP
20-07:C
LASS OF SERVICE OPTIONS (ADMINISTRATOR LEVEL)
Description
Use Program 20-07 : Class of Service Options (Administrator Level) to define the administrator service
availability for each extension’s Class of Service.
Input Data
IN
SA
SB
Class of Service Number 01-15
Prog.
No.
Item Input Data Default*
Related
Program
20-07-01
Manual Night Service Enabled
Enabled/disabled an extension’s ability to use man-
ual Night Service Switching
0 : Off
1 : On
0 11-10-01
20-07-02
Changing the Music on Hold Tone
Enable/disable an extension’s ability to change the
Music on Hold tone
0 11-10-02
20-07-03
Time Setting
Enables/disables an extension’s ability to set the
Time via
Service Code 828.
1 11-10-03
20-07-04
Storing Abbreviated Dialling Entries
Enables/disables an extension’s ability to store Ab-
breviated Dialling numbers. With this disabled, an
extension will display only the name assigned to the
Abbreviated Dialling number - the telephone number
will not be displayed. This could be used if you wish
to prevent Account Codes from being displayed.
1 11-10-04
20-07-05
Set/Cancel Automatic Transfer to Transfer
1
11-10-06
11-10-07
11-10-08
20-07-06 -Not Used-
- -
20-07-07 -Not Used-
- -
20-07-08 -Not Used-
- -
20-07-09 -Not Used-
- -
20-07-10
Programmable Function Key Programming
(Appearance Level)
Enables/disables an extension’s ability to program
their
Appearance function keys using Service Code 852
(by
default).
1 11-11-38
20-07-11
Forced Trunk Disconnect (analogue trunk only)
Enables/disables an extension’s ability to use
Forced Trunk Disconnect.
0 11-10-26
20-07-12 Trunk port disable
0 11-10-27
20-07-13
VRS Record
Enables/disables extension’s ability to record, erase
and listen to VRS messages
1 11-10-19
To Next Page
Loading...
