NEC Xen Topaz - Program 32 - Doorbox Setup; Doorbox Ring Assignment

Program 26 to 35
Xen Topaz Programming Manual 251
PROGRAM 32: DOORBOX SETUP
32-02: D
OORBOX RING ASSIGNMENT
Description
Use Program 32-02 : Doorbox Ring Assignments to assign the extension which will ring when a caller
presses the associated Doorbox’s call button.
Input Data
Conditions
None
Feature Cross Reference
♦ Doorbox
Telephone Programming Instructions
To enter data for Program 32-02 (Doorbox Ring Assignment):
1. Enter the programming mode.
2. Enter 32 02
3. Enter the number of the item you want to program.
4. Select the Doorbox Number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Doorbox Number
1-6
Day/Night
Mode
Doorbox Group Number Extension Number Default
Related
Program
1-8
01-32 Max. 4 digits
No set-
ting
32-02-01 DOOR 1
Mode1=01 TEL
32-02-xx DOOR x
Modex=xxTELxxxx