NEC Xen Topaz - Page 257

Program 26 to 35
Xen Topaz Programming Manual 250
PROGRAM 32: DOORBOX SETUP
32-01: D
OORBOX TIMERS
Description
Use Program 32-01 : Doorbox Timers to assign the timers used for the Doorbox.
Input Data
Conditions
None
Feature Cross Reference
♦ Doorbox
Telephone Programming Instructions
To enter data for Program 32-01(Doorbox Timers):
1. Enter the programming mode.
2. Enter 32 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item Input Data Default
Related
Program
32-01-01
Doorbox Answer Time
A keyset user must answer Doorbox chimes
within this interval.
0-64800(sec.) 30
32-01-02
Door Lock Cancel Time
When a single line telephone user hook flashes
or a keyset user presses the FLASH key while
talking to a Doorbox, the strike stays open for
this interval.
0-64800(sec.) 10
32-01-03
Off-Premise Call Forward by Doorbox
Disconnect Timer
Define the conversation period for an Off-
Premise Call Forward by Doorbox call. When
this timer expires, the caller will hear busy tone
for 3 seconds (fixed timer) and the call will then
be disconnected.
0-64800(sec.) 60
32-01-01
Answer TM 30
32-01-xx
xxxxx