Xen Topaz Programming Manual 34
Program 10 to 11
PROGRAM 11: SYSTEM NUMBERING
11-04: V
IRTUAL EXTENSION NUMBERING
Description
Use Program 11-04 : Virtual Extension Numbering to define the virtual extension numbers. The exten-
sion number can be up to four digits long. The first/second digit(s) of the number should be assigned in
Program 11-01.
Input Data
Default
Virtual Extension Port Number 1-50: No setting
Conditions
None
Feature Cross Reference
♦ Flexible System Numbering
♦ Multiple Directory Numbering/ Call Coverage
Telephone Programming Instructions
To enter data for Program 11-04 (Virtual Extension Numbering):
1. Enter the programming mode.
2. Enter 11 04
3. Enter the number of the item you want to program.
4. Select the Virtual port number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Virtual Extension Port Number
01-50
Virtual Extension Number Description
Dial (up to 4 digits)
Set up Virtual Extension Numbers.
The extension number cannot be duplicated in
Programs 11-02, 11-06, 11-07 and 11-08.
11-04-01V-Port1
Vir Ext No.
11-04-xxV-Port xx
xxxxx
To Next Page
Loading...
