Program 12 to 15
Xen Topaz Programming Manual 69
PROGRAM 13: ABBREVIATED DIALLING
13-05: A
BBREVIATED DIALLING TRUNK GROUP
Description
Use Program 13-05 : Abbreviated Dialling Trunk Group to define the trunk group to be seized for each
Abbreviated Dialling number (refer to Program 13-05).
If this program has an entry of ‘0’ (no setting), then seizing a line follows the trunk access group routing of
the caller’s extension (refer to Program 14-06). This setting is only available in External Abbreviated Dialling
Mode (Program 13-01-01).
Input Data
Default
No setting
Conditions
None
Feature Cross Reference
♦ Abbreviated Dialling
Telephone Programming Instructions
To enter data for Program 13-05(Abbreviated Dialling Trunk Group):
1. Enter the programming mode.
2. Enter 13 05
3. Enter the number of the item you want to program.
4. Select the Abbreviated Dialling Area number to programmed by pressing the FLASH or the VOLUME▲
or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Abbreviated Dialling Bin Number 0-1999
Trunk Group Number
0-25
13-05-01 ABB0
TRK Group No 0
13-05-xx ABBxxx
xxxxx
To Next Page
Loading...
