Program 21 to 25
Xen Topaz Programming Manual 174
PROGRAM 22: INCOMING CALL SETUP
22-04: I
NCOMING EXTENSION RING GROUP ASSIGNMENT
Description
Use Program 22-04 : Incoming Extension Ring Group Assignment to assign extensions to Ring
Groups. Calls ring extensions according to Ring Group programming. Use Program 22-05 to assign trunks
to Ring Groups. IRG can have up to 32 extension numbers assigned.
Input Data
Default
Extension 200 rings for incoming Ring Group 1 calls. All other extensions do not ring for incoming Ring
Group 1 calls.
Conditions
♦ Ring Groups
Feature Cross Reference
Ring Groups
Telephone Programming Instructions
To enter data for Program 22-04 (Incoming Extension Ring Group Assignment):
1. Enter the programming mode.
2. Enter 22 04
3. Enter the number of the item you want to program.
4. Select the Incoming Ring Group number to be programmed by pressing the FLASH or the VOLUME ▲
or VOLUME ▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Incoming Ring Group Number 1-25
Incoming Ring
Group No.
Extension
Number
Description
Related
Program
01-32
Max. 4 digits
Use this program to assign extensions to Ring
Groups. Calls ring extensions according to Ring
Group programming.
22-02
22-05
22-06
22-04-01INC Gr1
Memb.01= 200
22-04-xx INCGrpxx
xxxxx
To Next Page
Loading...
