Program 16 to 20
Xen Topaz Programming Manual 125
PROGRAM 20: SYSTEM OPTION SETUP
20-09: C
LASS OF SERVICE OPTIONS (INCOMING CALL SERVICE)
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming call fea-
ture availability for each extension’s Class of Service.
Input Data
Conditions
None
Feature Cross Reference
♦ Class of Service
IN
SA
SB
Class of Service Number 01-15
Prog.
No.
Item Input Data Default*
Related
Program
20-09-01
Second Call for DID/ DISA/ DIL
Enables/disables the extension’s ability to receive a
second call from a DID, DISA, DIL, or tie line caller.
Note: With this option set to ‘1’, the destination ex-
tension
must be busy in order for a second DNIS caller to
ring through. If the destination extension does not
have a line or loop key available for the second call
and a previous call is ringing the extension but has
not yet been answered, the second caller will hear
busy regardless of this program’s setting.
0 : Off
1 : On
0
20-09-02
Caller ID Display
Enables/disables the Caller ID display at an exten-
sion.
1
14-02-10
15-02-15
15-07-01
20-09-03
Sub Address Identification 0
20-09-04
Notification for Incoming Call List Existence
When enabled, “Check List” appears on a System
Phone’s LCD for any new call received with Caller
ID. This indicates that there is new Called ID infor-
mation to view in the Caller ID list. When disabled,
this LCD indication is not provided, although the new
Caller ID can still be viewed in the Called ID list.
1
20-09-05
Setting Handsfree Answerback or Forced Inter-
com
Ringing
Allows/prevents an extension from enabling Hands-
free
Answerback or Forced Intercom Ringing for their
incoming Intercom calls.
1
11-11-15
11-11-16
To Next Page
Loading...
