Program 21 to 25
Xen Topaz Programming Manual 215
PROGRAM 25: DID/DISA SETUP
25-09: C
LASS OF SERVICE FOR DISA USERS
Description
Use Program 25-09 : Class of Service for DISA Users to set the DISA Class of Service for each user.
When a DISA caller enters a password (defined in Program 25-08), the system identifies the user and asso-
ciates the appropriate DISA Class of Service with the call. Assign the DISA Class of Service options in Pro-
gram 20-14. When programming DISA Class of Service, you make one entry for each Night Service mode.
Input Data
Conditions
1) The DISA Class of Service cannot be 0.
2) You cannot use Program 20-06 to assign Class of Service to DISA trunks.
Feature Cross Reference
♦ Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-09(Class of service for DISA Users):
1. Enter the programming mode.
2. Enter 25 09
3. Enter the number of the item you want to program.
4. Select the DISA User number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
DISA User Number
1-15
Day/Night Mode Class of Service Default
1-8 1-15 1
25-09-01DISA-U1
Mode1 Class 1
25-09-xxDISA-Uxx
xxxxx
To Next Page
Loading...
