Program 26 to 35
Xen Topaz Programming Manual 260
PROGRAM 35: SMDR AND ACCOUNT CODE SETUP
35-03: SMDR P
ORT ASSIGNMENT FOR TRUNK GROUPS
Description
Use Program 35-03 : SMDR Port Assignment for Trunk Group to assign the SMDR port for each trunk
group.
Input Data
Conditions
None
Feature Cross Reference
♦ Station Message Detail Recording (SMDR)
♦ Trunk Group Routing
Telephone Programming Instructions
To enter data for Program 35-03 (SMDR Port Assignment for Trunk Group):
1. Enter the programming mode.
2. Enter 35 03
3. Enter the number of the item you want to program.
4. Select the Trunk Group number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB COPY
Trunk Group No. SMDR Port No. Default
Related
Program
1-25
1,2
1
35-03-01TrkGrp1
SMDR Port 1
35-03-xxTrkGrpxx
xxxxx
To Next Page
Loading...
