NEC Xen Topaz - Voice Recording Service Option

Program 40 to 92
Xen Topaz Programming Manual 272
PROGRAM 40: VOICE MAIL SETUP
40-10: V
OICE RECORDING SERVICE OPTION
Description
Use Program 40-10 : Voice Recording Service Option define the system options for the Voice Recording
feature.
Input Data
Conditions
None
Feature Cross Reference
♦ Voice Response System (VRS)
Telephone Programming Instructions
To enter data for Program 40-10 (Voice Announce Service Option):
1. Enter the programming mode.
2. Enter 40 10
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item Input Data Default
Related
Program
40-10-01
VRS Fixed Message
Enable (1) or disable (0) the system’s ability
to play the fixed VRS messages (such as
“You have a message.”).
0 : Not Used
1 : Used
1
40-10-02
General Message Number
This item assigns the VRS message number
to be used as the General Message.
0-48
(0 : No General
message)
0
40-10-03
VRS No Answer Destination
This item assigns the transferred Ring Group
when the VRS is unanswered after Call For-
warding with Personal Greeting Message.
0-25
(Incoming Ring
Group No.)
0 (No
Setting)
40-10-04
VRS No Answer Time
If an extension has Personal Greeting en-
abled and all VRS ports are busy, a DIL or
DISA call to the extension will wait this inter-
val for a VRS port to become free.
0-64800(sec.)
0
40-10-05
Park and Page Repeat Timer
If a Park and Page is not picked up within this
interval, the Paging announcement repeats.
0-64800(sec.)
0
40-10-01
VRS Fixed Msg 1
40-10-xx
xxxxx