Program 40 to 92
Xen Topaz Programming Manual 330
PROGRAM 90: MAINTENANCE PROGRAM
90-25: System Alarm Report CC Mail Setup
Description
Use Program 90-25 : System Alarm Report CC Mail Setup to define the mail address to receive the sys-
tem alarm report CC Mail setup.
Input Data
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-25 (System Alarm Report CC Mail Setup):
1. Enter the programming mode.
2. Enter 90 25
3. Enter the number of the item you want to program.
4. Select the CC number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section
.
IN
SA
SB
CC Number
1-5
90-25-01 CC No1
Address
90-25-xx
xxxxx
To Next Page
Loading...
