NEC Xen Topaz - Abbreviated Dialling Number and Name; Station Abbreviated Dialling Number and Name

Program 12 to 15
Xen Topaz Programming Manual 70
PROGRAM 13: ABBREVIATED DIALLING
13-06: S
TATION ABBREVIATED DIALLING NUMBER AND NAME
Description
Use Program 13-06 : Station Abbreviated Dialling Number and Name to store Abbreviated Dialling data
into the Station Abbreviated Dialling areas. This program is also used to define the names assigned to the
Station Abbreviated Dialling numbers.
Input Data
Conditions
None
Feature Cross Reference
♦ Abbreviated Dialling
Telephone Programming Instructions
To enter data for Program 13-06(Station Abbreviated Dialling Number and Name):
1. Enter the programming mode.
2. Enter 13 06
3. Enter the number of the item you want to program.
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Extension Number Up to 4 digits
Station Abbreviated Dialling Bin Number 01-20
Prog. No. Item Input data Default Related Program
13-06-01 Abbreviated Dialling Data
1-9,0,*,#,,P,R,@
(Max. 36 digits)
No
Setting
13-01-02
Name
Max. 12 Characters
13-06-01 TEL200
01:
13-06-xx TELxxx
xxxxx