NEC Xen Topaz - VRS Waiting Message for Department Group

Program 21 to 25
Xen Topaz Programming Manual 190
PROGRAM 22: INCOMING CALL SETUP
22-15: VRS W
AITING MESSAGE FOR DEPARTMENT GROUP
Description
Use Program 22-15 : VRS Waiting Message for Department Group to define for each Department
(Extension) Group the timers, VRS message number and tone kind for VRS Waiting Message.
Input Data
Conditions
1. All extensions in a Department Group must be busy before the VRS Waiting Message sequence will
play to the caller.
2. IF all extensions are logged out (via SC:851:46 Department Log Out) then VRS Waiting Message is
not played. ISDN indial callers will hear busy or be transferred to a ring group. PSTN callers will re-
vert to a ring group.
Feature Cross Reference
♦ Department Group
IN
SA
SB
Extension Group Number
01-32
Prog. No. Item Input Data
Default
22-15-01
1
st
Waiting Message start timing 0-64800(sec.) 0
22-15-02
1
st
Waiting Message Number
0-49 (0 : No
Message, 49 : Fixed
message)
49
22-15-03
1
st
Waiting Message sending count 0-255 0
22-15-04
2
nd
Waiting Message Number
0-49 (0 : No
Message, 49 : Fixed
message)
49
22-15-05
2
nd
Waiting Message sending count 0-255 0
22-15-06
Tone kind at Message Interval 0 : Ring Back Tone
1 : MOH Tone
2 : BGM Source
0
22-15-07
Disconnect time after the end of VRS Waiting
Message
0-64800(sec.) (0 :
Not Disconnected)
60