NEC Xen Topaz - Page 198

Program 21 to 25
Xen Topaz Programming Manual 191
PROGRAM 22: INCOMING CALL SETUP
22-15: VRS W
AITING MESSAGE FOR DEPARTMENT GROUP
Telephone Programming Instructions
To enter data for Program 22-15 (VRS Waiting Message for Department Group):
1. Enter the programming mode.
2. Enter 22 15
3. Enter the number of the item you want to program.
4. Select the Extension Group number to be programmed by pressing the FLASH or the VOLUME▲ or
▼ VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
22-15-01 Ex.Gr1
MSG1 StatTM0
22-15-xx Ex.Grxx
xxxxx