Program 21 to 25
Xen Topaz Programming Manual 219
PROGRAM 25: DID/DISA SETUP
25-13: S
YSTEM OPTION FOR DISA
Description
Use Program 25-13 : System Option for DISA to enter the password DISA callers must dial before the
system will allow them to record, listen to and or erase the VRS messages. This program also is used to
define additional DISA call options.
Input Data
Conditions
None
Feature Cross Reference
♦ Direct Inward System Access (DISA)
♦ Voice Response System (VRS)
Telephone Programming Instructions
To enter data for Program 25-13(System Option for DISA):
1. Enter the programming mode.
2. Enter 25 13
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item Input Data
Default
Related
Program
25-13-01
VRS Password
Enter the password DISA callers must dial be-
fore the system will allow them to record, listen
to and or erase the VRS messages.
0-9,*,# (Fixed
6 digits)
000000
25-13-02
-Not Used-
- -
25-13-03
-Not Used-
- -
25-13-01
Access PWD000000
25-13-xx
xxxxx
Xen Topaz Programming Manual 219 Xen Topaz Programming Manual 219
To Next Page
Loading...
