NEC Xen Topaz - Program 10 - System Configuration Setup; Time and Date

Xen Topaz Programming Manual 13
Program 10 to 11
PROGRAM 10: SYSTEM CONFIGURATION SETUP
10-01: TIME AND DATE
Description
Use Program 10-01 : Time and Date to change the system Time and Date through system programming.
Extension users can also dial Service Code 828 to change the Time if allowed by an extension’s Class of
Service.
Input Data
Conditions
None
Feature Cross Reference
♦ Time and Date
Telephone Programming Instructions
To enter data for Program 10-01 (Time and Date):
1. Enter the programming mode.
2. Enter 10 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section
Prog. No. Item Input data Default Description Related
Program
10-01-01 Year 00-99 No setting Enter two digits for year (00-99)
10-01-02 Month 01-12 No setting Enter two digits(01-12) for the
month
10-01-03 Day 01-31 No setting Enter two digits(01-31) for the day
10-01-04 Week
1-7
(Sun-Sat)
No setting
Enter digit for the day of the week
(1=Sunday,……..,7=Saturday)
10-01-05 Hour 00-23 No setting Enter two digits(00-23) for the
hour
10-24
10-01-06 Minute 00-59 No setting Enter two digits(00-59) for the
Minute
10-01-07 Second 00-59 No setting Enter two digits(00-59) for the
second
IN
SA
SB
10-01-01
Year
10-01-xx
xxxxx