Program 16 to 20
Xen Topaz Programming Manual 120
PROGRAM 20: SYSTEM OPTION SETUP
20-06: C
LASS OF SERVICE FOR EXTENSIONS
Description
Use Program 20-06 : Class of Service for Extensions to assign a Class of Service to an extension.
There are15 Classes of Service that can be assigned. To specify the options in each Class of Service, refer
to Programs 20-07 through 20-13. You make eight entries for Program 20-06, one for each Night Service
Mode.
Input Data
Conditions
None
Feature Cross Reference
♦ Class of Service
Telephone Programming Instructions
To enter data for Program 20-06(Class of Service for Extensions):
1. Enter the programming mode.
2. Enter 20 06
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
COPY
IN
SA
SB
Extension Number Max. 4 digits
Day/Night Mode Class of Service Extensions Default
1-8 1-15 All Extensions are Class 1.
20-06-01 TEL200
Mode1 ClassNo.1
20-06-xx TELxxxx
xxxxx
To Next Page
Loading...
