NEC Xen Topaz - Normal Incoming Ring Mode

Program 21 to 25
Xen Topaz Programming Manual 176
PROGRAM 22: INCOMING CALL SETUP
22-06: N
ORMAL INCOMING RING MODE
Description
Use Program 22-06 : Normal Incoming Ring Mode to define whether or not an extension should ring for
the Normal Incoming Ring Mode.
Input Data
Conditions
None
Feature Cross Reference
♦ Central Office Calls, Answering
Telephone Programming Instructions
To enter data for Program 22-06 (Normal Incoming Ring Mode):
1. Enter the programming mode.
2. Enter 22 06
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME
▲ or VOL-
UME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Extension Number
Max. 4 digits
Day/Night
Mode
Incoming Group Number
Default Related Program
1-8
0 : No Ring
1 : Ring
1
22-04
22-05
22-06-01 TEL200
Mode1 =1
22-06-xx TELxxxx
xxxxx