NEC Xen Topaz - Program 25 - DID;DISA Setup; DID;DISA VRS Message

Program 21 to 25
Xen Topaz Programming Manual 206
PROGRAM 25: DID/DISA SETUP
25-02: DID/DISA VRS M
ESSAGE
Description
Use Program 25-02 : DID/DISA VRS Message to assign the VRS message number (“Talkie”) to be used
as the Automated Attendant Message for each trunk which is assigned as a DID/DISA (for each night ser-
vice made).
Input Data
Conditions
None
Feature Cross Reference
♦ Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-02 (DID/DISA VRS Message):
1. Enter the programming mode.
2. Enter 25 02
3. Enter the number of the item you want to program.
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Trunk Port Number
1-51
Day/Night
Mode
Talkie Type Additional data
Default
Related
Program
1-8
0 : No Talkie
1 : VRS
2 : ACI
3 : SLT
1 : VRS 01-48 (VRS Message No.)
2 : ACI 1-4 (ACI Group No.)
3 : SLT 1-32 (Station Group No.)
0
25-02-01TrkPrt1
Mode1 Talkie= 0
25-02-xxTrkPrtxx
xxxxx