NEC Xen Topaz - Program 15 - Extension Basic Setup; Multi-Line Telephone Basic Data Setup

Program 12 to 15
Xen Topaz Programming Manual 88
PROGRAM 15: EXTENSION BASIC SETUP
15-02: M
ULTI-LINE TELEPHONE BASIC DATA SETUP
Description
Use Program 15-02 : Multi-Line Telephone Basic Data Setup to set up various keyset options.
Input Data
IN
SA
SB COPY
Extension Number Max. 4 digits
Prog. No. Item Input data Default
Related Program
15-02-01
Display Language Selection
1 : English
5 : Spanish
7 : Portuguese
1
15-02-02
-Not Used- -
-
15-02-03
-Not Used- -
-
15-02-04
Abbreviated Dialling DC Key Control
Use this option to control the function of
the extension’s DC key when used with
Abbreviated Dialling. The DC key can
access either the Common or Group
Abbreviated Dialling numbers.
0 : Common and
individual Ab-
breviated Dial-
ling
1 : Group Abbrevi-
ated Dialling
0
15-02-05
Transfer Key Operation Mode
Use this option to set the operation
mode of the extension’s CONF (TRF)
key. The keys can be for Call Transfer,
Serial Calling or Flash. When selecting
the
Flash option (selection 2), refer also to
Program 81-01-14.
0 : Transfer
1 : Series call
2 : Flash
0
15-02-06
Hold Key Operation Mode
Use this option to set the function of the
keyset Hold key. The Hold key can acti-
vate normal Hold, Exclusive Hold or
Park.
0 : Normal Hold
1 : Exclusive Hold
2 : Park Hold
0
15-02-07
Automatic Hold for Trunk Key
During Trunk Call, press other Trunk
key to make a hold or disconnect.
0 : Enable (Hold)
1 : Disable
(Disconnect)
1
15-02-08
Pre-select/One-touch Key
Use this option to answer the Incoming
Trunk call or hold line by pressing Trunk
key.
0 : Pre-select
1 : One-touch
1
15-02-09
Ringing Line Preference for Intercom
Calls
Use this option to select between Idle
and Ringing Line Preference for Inter-
com Call.
0 : Off
1 : On
1
15-02-10
Ringing Line Preference for Trunk
Calls
Use this option to select between Idle
and Ringing Line Preference for Trunk
Call.
0 : Off
1 : On
1