NEC Xen Topaz - Time Schedule for ARS;F-Route

Program 40 to 92
Xen Topaz Programming Manual 283
PROGRAM 44: ARS/F-ROUTE SETUP
44-08: T
IME SCHEDULE FOR ARS/F-ROUTE
Description
Use Program 44-08 : Time Schedule for ARS/F-Route to define the daily pattern of the ARS/F-Route fea-
ture. ARS/F-Route has 10 time patterns. These patterns are used in Program 44-09 and 44-10. The daily
pattern consists of 20 time settings.
Input Data
Default
All Schedule Pattern : 0:00-0:00, Mode 1
Example 1: Time Pattern 1
0:00 8:00 18:00 22:00 0:00
To make the above schedule, it is necessary to set the data as follows:
Time Setting 01 : 00:00 – 08:00 Mode 3
Time Setting 02 : 08:00 – 18:00 Mode 1
Time Setting 03 : 18:00 – 22:00 Mode 2
Time Setting 04 : 22:00 – 00:00 Mode 3
Example 2: Time Pattern 2
0:00 0:00
To make the above schedule, it is necessary to set the data as follows:
Time Setting 01 : 00:00 – 00:00 Mode 2
Conditions
None
Feature Cross Reference
Automatic Route Selection (ARS)/F-Route
Mode3
Midnight
Mode1
Day
Mode2
Night
Mode3
Midnight
Mode2
Night
IN
SA
SB
Schedule Pattern Number
01-10
Time Number Start Time End Time Mode
01-20
0000-2359
0000-2359
1-8