NEC Xen Topaz - Page 291

Program 40 to 92
Xen Topaz Programming Manual 284
PROGRAM 44: ARS/F-ROUTE SETUP
44-08: T
IME SCHEDULE FOR ARS/F-ROUTE
Telephone Programming Instructions
To enter data for Program 44-08(Time Schedule for ARS/F-Route):
1. Enter the programming mode.
2. Enter 44 08
3. Enter the number of the item you want to program.
4. Select the Schedule Pattern number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
44-08-01TimPtn1
01:Start =00:00
44-08-xxTimPtnxx
xxxxx