NEC Xen Topaz - ARS;F-Route Table

Program 40 to 92
Xen Topaz Programming Manual 279
PROGRAM 44: ARS/F-ROUTE SETUP
44-05: ARS/F-R
OUTE TABLE
Description
Use Program 44-05 : ARS/F-Route Table to set the ARS/F-Route table. There are 4 kinds of order. If the
higher priority trunk groups are busy, the next order group will be used. If a lower priority route is selected,
the caller may be notified with a beep tone.
Input Data
Conditions
None
Feature Cross Reference
♦ Automatic Route Selection (ARS)/F-Route
IN
SA
SB
ARS/F-Route Table Number
1-500
Priority Number
1-4
Prog. No. Item Input Data Default
Related
Program
44-05-01
Trunk Group Number 0 : (0 : No setting)
1-25 : Trunk Group Number
255 : (Extension Call)
0
44-05-02
Delete Digits 0-255(0 : No setting,
255 : Delete All digits)
0
44-05-03
Additional Dial Number 0-1000
0
44-05-04
Beep Tone 0 : Off
1 : On
0
44-05-05
Gain Table Number for Internal
Calls
0-500
(0 : No setting)
0
44-05-06
Gain Table Number for Tandem
Connection
0-500
(0 : No setting)
0
44-05-07
ARS Class of Service 0-16
0
44-05-08
Dial Treatment 0-15
0