NEC Xen Topaz - Page 285

Program 40 to 92
Xen Topaz Programming Manual 278
PROGRAM 44: ARS/F-ROUTE SETUP
44-03: D
IAL ANALYSE EXTENSION TABLE
Telephone Programming Instructions
To enter data for Program 44-03 (Dial Analyze Extension Table):
1. Enter the programming mode.
2. Enter 44 03
3. Enter the number of the item you want to program.
4. Select the Extension Table Area number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
44-03-01Exp-TBL1
001:Dial=
44-03-xx Exp-TBLx
xxxxx