NEC Xen Topaz - Conversation Recording Destination for Trunks

Program 12 to 15
Xen Topaz Programming Manual 84
PROGRAM 14: TRUNK BASIC SETUP
14-09: C
ONVERSATION RECORDING DESTINATION FOR TRUNKS
Description
Use Program 14-09 : Conversation Recording Destination for Trunks to set the Conversation Re-
cording destination for each trunk.
Note: If both Programs 14-09 and 15-12 define a destination, the destination in Program 15-12 will be fol-
lowed.
Input Data
♦ If automatic telephone call recording is set-up, the recording will be started from the time of answer-
ing an incoming call
.
♦ If the PRG14-09-04 is set to “1” , the recording will be started from the time of answering an outgoing
call.
♦ In case of Conversation recording by the SLT;
If the recording destination is set to Voice Mailbox, the service of the feature is only available for the
Automatic Conversation Recording and the conversation recording is automatically storing to own
mailbox.
Conditions
None
Feature Cross Reference
♦ Voice Mail
IN
SA
SB COPY
Trunk Port Number 1-51
Prog. No.
Item Input Data Default
14-09-01 Recording Destination Extension Number
Extension Number
(Up to 4 digits)
No setting
14-09-02 Automatic Recording
0 : Off
1 : On
0
14-09-03 Recording Contents Storing Method
0 : Specifies by Dialling
1 : Own Mailbox
0
14-09-04 Automatic Recording for Outgoing Call
0 : Off
1 : On
0