Program 12 to 15
Xen Topaz Programming Manual 53
PROGRAM 12: NIGHT MODE SETUP
12-01: N
IGHT MODE FUNCTION SETUP
Description
Use Program 12-01 : Night Mode Function Setup to set up the Night Mode options. Refer to the following
chart for a description of each option, its range and default setting.
Input Data
Note: Even if the operation mode is changed manually, the operation mode changes according to the
schedule set up.
Conditions
Feature Cross Reference
♦ Night Service
Telephone Programming Instructions
To enter data for Program 12-01 (Night Mode Function Setup):
1. Enter the programming mode.
2. Enter 12 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item Input data Default Description
Related
Program
12-01-01
Manual Night
Service En-
able
0 : Off
1 : On
1
Allows/prevents users from activating
Night Service by dialling a service
code.
11-10-01
12-01-02
Automatic
Night Service
0 : Off
1 : On
0
According to a preset schedule, en-
able
or disable Automatic Night Service for
the system.
12-02
12-03
12-04
12-01-01
Manual NT-Mode 1
12-01-xx
xxxxx
To Next Page
Loading...
