NEC Xen Topaz - System Alarm Report Notification Time Setup

Program 40 to 92
Xen Topaz Programming Manual 329
PROGRAM 90: MAINTENANCE PROGRAM
90-24: System Alarm Report Notification Time Setup
Description
Use Program 90-24 : System Alarm Report Notification Time Setup to set up when the alarm report will
print.
Input Data
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-24 (System Alarm Report Notification Time Setup):
1. Enter the programming mode.
2. Enter 90 24
3. Enter the number of the item you want to program.
4. Select the Notification number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item Input Data Default
Related
Program
90-24-01
Month 00-12(0 : disabled) 00 90-12-06
90-24-02
Day 00-31 00
90-24-03
Hour 00-23 00
90-24-04
Minute 00-59 00
90-24-01 Noti1
Month
90-24-xx Notixx
xxxxx