Program 26 to 35
Xen Topaz Programming Manual 229
PROGRAM 26: ARS SERVICE & LEAST COST ROUTING
26-07: LCR C
OST CENTRE CODE TABLE
Description
Use Program 26-07 : LCR Cost Centre Code Table to define the optional cost centre code required by
the Indirect Carrier. The cost centre code is set for each extension. The cost centre code is inserted if set in
Program 26-05-04.
Input Data
Conditions
The settings must comply with the requirements of the Indirect Carrier.
The Authorization Code is used by the Indirect Carrier to identify the customer for billing purposes.
Feature Cross Reference
♦ Least Cost Routing
Telephone Programming Instructions
To enter data for Program 26-07(LCR Cost Centre Code Table):
1. Enter the programming mode.
2. Enter 26 07
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Extension
Number
Input Data Default
Related
Program
Max. 4 digits
Max. 6 digits（0-9,*,#）
No setting 26-05-04
26-07-01 TEL200
Center CD
26-07-xx TELxxxx
xxxxx
To Next Page
Loading...
