NEC Xen Topaz - Program 81 - Basic Hardware Setup for Trunk; Analogue Station Initial Data Setup

Program 40 to 92
Xen Topaz Programming Manual 305
PROGRAM 80: BASIC HARDWARE SETUP FOR EXTENSION
81-04: A
NALOGUE STATION INITIAL DATA SETUP
Description
Use Program 82-04 : Analogue Station Initial Data Setup to define the various basic timers for the
308M/308ME Card.
Input Data
Conditions
None
Feature Cross Reference
None
IN
SA
SB
Prog. No. Item Input Data
Default
Related
Program
82-04-01
Companding method type
0 : µ-law
1 : A-law
1 (A-law)
82-04-02 Ringing frequency
0 : 25Hz
1 : 20Hz
2 : 16Hz
0 (25Hz)
82-04-03
- Not Used -
- -
82-04-04
- Not Used -
- -
82-04-05
- Not Used -
- -
82-04-06
- Not Used -
- -
82-04-07
Minimum Hook Flash Time
1-255(5ms-
1275ms)
17 (85ms)
82-04-08
Maximum Hook Flash Time
1-255(5ms-
1275ms)
28 (140ms)
82-04-09
Minimum Ground Flash Time
1-255(5ms-
1275ms)
21 (105ms)
82-04-10
Minimum Off-Hook Time
1-255(5ms-
1275ms)
21 (105ms)
82-04-11
No detection time after Off-Hook
1-255(5ms-
1275ms)
60 (300ms)
82-04-12
No detection time after pulse dial de-
tection
1-255(5ms-
1275ms)
70 (350ms)
82-04-13
Loop disconnect time, Reversal time
1-255(5ms-
1275ms)
60 (300ms)
82-04-14
Ring, Message wait period time
1-255(5ms-
1275ms)
150
(750ms)