Program 21 to 25
Xen Topaz Programming Manual 214
PROGRAM 25: DID/DISA SETUP
25-08: DISA U
SER ID SETUP
Description
Use Program 25-08 : DISA User ID Setup to set the 6-digit DISA password for each user. There are 15
users each with one 6-digit password.
Input Data
Conditions
None
Feature Cross Reference
♦ Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-08(DISA User ID Setup):
1. Enter the programming mode.
2. Enter 25 08
3. Enter the number of the item you want to program.
4. Select the DISA User number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
DISA User Number
1-15
Password Default Related Program
Dial (6 digits fixed) No setting
25-08-01DISA-U1
Password
25-08-xxDISA-Uxx
xxxxx
To Next Page
Loading...
