NEC Xen Topaz - Main Software Information

Program 40 to 92
Xen Topaz Programming Manual 324
PROGRAM 90: MAINTENANCE PROGRAM
90-16: M
AIN SOFTWARE INFORMATION
Description
Use Program 90-16 : Main Software Information to display the main software information on the CPU.
This Version Number information can also be viewed outside of system programming by pressing OPAC
Key and Dial 3 then the on any display keyset.
Input Data
Conditions
None
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-16 (Main Software Information):
1. Enter the programming mode.
2. Enter 90 16
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item Data Component
90-16-01
Version Number 01.00 - 99.99 ASCII Code (5 Byte)
90-16-02
Software Release Data
May 22 2004 17:53:46
<PCPro>
May 22 04 17:53
<TELPro>
ASCII Code (20 Byte)
<PCPro>
ASCII Code (16 Byte)
<TELPro>
90-16-01
Version No .
90-16-xx
xxxxx