Program 26 to 35
Xen Topaz Programming Manual 242
PROGRAM 31: EXTERNAL SPEAKER AND INTERNAL PAGING
31-02: I
NTERNAL PAGING GROUP ASSIGNMENT
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to Internal Paging Groups
(i.e., Page Zones). The setting in this program also determines if the Internal Page Group can receive Inter-
nal All Call Paging. The system can have up to 32 paging groups. An extension can be in only one Internal
Paging Group.
Input Data
Conditions
None
Feature Cross Reference
♦ Paging, Internal
Telephone Programming Instructions
To enter data for Program 31-02 (Internal Paging Group Assignment):
1. Enter the programming mode.
2. Enter 31 02
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Select the Extension number to be Programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB COPY
Prog. No.
Extension
Number
Item Input Data Default
31-02-01 Max. 4 digits
Internal Paging Group Number
Assign extensions to Internal Paging
Groups (i.e., Page Zones). The sys-
tem allows up to 32 Internal Paging
Groups.
An extension can be in only
one Internal
Paging Group.
0-32(0 : no setting)
1
31-02-02
Internal All Call Paging Receiving
Allow or prevent All Call Internal Pag-
ing
for each extension. If allowed,
extension can place and receive All
Call Internal Paging announcements.
If prevented,
extension can only make
(not receive) All Call Internal Paging
announcements.
0 : Off
1 : On
1
31-02-01 TEL200
INT PG GP No 0
31-02-xx TELxxxx
xxxxx
To Next Page
Loading...
