NEC Xen Topaz - Message Setup for Non-Caller ID Data

Program 16 to 20
Xen Topaz Programming Manual 147
PROGRAM 20: SYSTEM OPTION SETUP
20-20: M
ESSAGE SETUP FOR NON-CALLER ID DATA
Description
Use Program 20-20 : Message Setup for Non-Caller ID Data to define the messages which will be dis-
played when no Caller ID information is received.
Input Data
Conditions
None
Feature Cross Reference
♦ Caller ID
Telephone Programming Instructions
To enter data for Program 20-20(Message Setup for Non-Caller ID Data):
1. Enter the programming mode.
2. Enter 20 20
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item Input data Default
20-20-01 Private Call
Up to 16 Alphanumeric
Characters
UNAVAILABLE INFO
20-20-02 Call from out of service area
OUT-OF-STATE
20-20-03 Call information with error
NO CALLER INFO
20-20-01
UNAVAILABLE INFO
20-20-xx
xxxxx