NEC Xen Topaz - Night Mode Group Assignment for Extensions

Program 12 to 15
Xen Topaz Programming Manual 60
PROGRAM 12: NIGHT MODE SETUP
12-05: N
IGHT MODE GROUP ASSIGNMENT FOR EXTENSIONS
Description
Use Program 12-05 : Night Mode Group Assignment for Extensions to a assign Day/Night Mode Group
for each extension.
Input Data
Default
No Setting
Conditions
None
Feature Cross Reference
♦ Night Service
Telephone Programming Instructions
To enter data for Program 12-05 (Night Mode Group Assignment for Extensions):
1. Enter the programming mode.
2. Enter 12 05
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Extension Number Max.4 digits
Night Mode Service Group Number Default
1-4 1
12-05-01 TEL200
Night Mode Grp 1
12-05-xx TELxxxx
xxxxx