Program 21 to 25
Xen Topaz Programming Manual 200
PROGRAM 24: HOLD/TRANSFER SETUP
24-04: A
UTOMATIC TRUNK-TO-TRUNK TRANSFER TARGET SETUP
Description
Use Program 24-04 : Automatic Trunk-to-Trunk Transfer Target Setup to assign the Abbreviated Dial-
ling number bin which should be used as the destination of the Automatic Trunk-to-Trunk Transfer.
Input Data
Conditions
None
Feature Cross Reference
♦ Transfer
Telephone Programming Instructions
To enter data for Program 24-04 (Automatic Trunk-to-Trunk Transfer Target Setup):
1. Enter the programming mode.
2. Enter 24 04
3. Enter the number of the item you want to program.
4. Select Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Trunk Port Number
1-51
Day/Night
Mode
Abbreviated
Dial Area
Number
Default Description
Related
Program
1-8
0-1999 1999
The destination of telephone number of the
Trunk-to-Trunk Transfer uses the number
registered into the Abbreviated Dial. Use
this program to setup the Abbreviated Dial
area.
11-10-8
13-04
24-05
24-04-01TrkPrt1
Mode1 ABB =1999
24-04-xxTrkPrtxx
xxxxx
To Next Page
Loading...
