Program 26 to 35
Xen Topaz Programming Manual 231
PROGRAM 26: ARS SERVICE & LEAST COST ROUTING
26-09: LCR M
ANUAL OVERRIDE EXEMPTION TABLE
Description
Use Program 26-09 : LCR Manual Override Exemption Table to define the numbers that must not be
sent via an indirect carrier when the user dials a Manual Override Access Code. The exemptions are nor-
mally Emergency Services that may not be supported by the indirect carrier.
Input Data
Conditions
If the number dialled by the user corresponds to an entry in Program 26-09 the Topaz will delete the Man-
ual Access code (Program 26-08) and route the call to the direct carrier. If the number specifies an Emer-
gency Service you must ensure that the direct carrier will accept the call.
Feature Cross Reference
♦ Least Cost Routing
Telephone Programming Instructions
To enter data for Program 26-09(LCR Manual Override Exemption Table):
1. Enter the programming mode.
2. Enter 26 09
3. Enter the number of the item you want to program.
4. Select the Exemption Table number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Manual Override Exemption Table Number
1-25
Prog. No. Description Input Data
Default
Related
Program
26-09-01
Exemption Number Max.4 digits ( 0-9,*,#)
Do not include the Ac-
cess Code.
Table No.1= 000
Table No.2~25 =
No Setting
26-08
26-09-01Exempt1
Dial 000
26-09-xx Exemptxx
xxxxx
To Next Page
Loading...
