NEC Xen Topaz - Program 30 - DSS;DIL Console; DSS Console Key Assignment

Program 26 to 35
Xen Topaz Programming Manual 233
PROGRAM 30: DSS/DIL CONSOLE
30-03: DSS C
ONSOLE KEY ASSIGNMENT
Description
Use Program 30-03 : DSS Console Key Assignments to customize the key assignments for 64-Button
DSS Consoles. A DSS Console key can have any function up to four digits long (e.g., extension number or
Service Code).
Input Data
Function Number Lists
1) General Functional Level (00-99)
IN
SA
SB COPY
DSS Console Number
1-9
Function
Number
Function Additional Data LED Indication
00
Not Defined
01
DSS/One-Touch
Extension number or any
number (Max.36 digits)
Red On: Extension Busy
Off : Extension Idle
Rapid Blink Red : DND or Call Forward
02
Microphone Key
(On/Off)
Red On: MIC On
Off : MIC Off
03
DND Key
Red On: DND Setup
04
BGM(On/Off)
Red On: BGM On
Off : BGM Off
05
Headset Key
Red On: Headset off-hook
Off: Headset on-hook
06
Transfer Key
None
07
Conference Key
Red On: Under Conference Operation
08
Incoming Call
Log
Rapid Blink Red : New Call Log
Red On: Call Log
Off : No Call Log
09
Operation Mode
Switch
Mode Number (1-8)
Red On: On mode
10
Call Forward -
Immediate
Slow Blink Red : Forwarding state
Rapid Blink Red : Forwarded state
11
Call Forward -
Busy
Slow Blink Red : Forwarding state
Rapid Blink Red : Forwarded state
12
Call Forward –
No Answer
Slow Blink Red : Forwarding state
Rapid Blink Red : Forwarded state