Program 21 to 25
Xen Topaz Programming Manual 164
PROGRAM 21: OUTGOING CALL SETUP
21-09: D
IAL BLOCK SETUP
Description
Use Program 21-09 : Dial Block Setup to defines the Dial Blocking Toll Restriction Class and Dial Block
Password to be used by the Supervisor extension.
Input Data
Conditions
This function works by password and Class of Service control (the supervisor is not an assigned extension).
If Dial Block is available for all Classes of Service, everyone may become a supervisor if they know the Dial
Block password.
Feature Cross Reference
♦ Toll Restriction
Telephone Programming Instructions
To enter data for Program 21-09 (Dial Block Setup):
1. Enter the programming mode.
2. Enter 21 09
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog. No. Item
Input Data Default
Related
Program
21-09-01
Toll Restriction Class With Dial Block
Assign a Toll Restriction Class of Service when
the Dial Block feature is used.
1-15
1
21-09-02
Supervisor Password
Assign a 4-digit password to be used by the su-
pervisor to enable or disable Dial Block for other
extensions.
0-9,*,#
4-digits Fixed
No set-
ting
21-09-01
Dial Block T/R1
21-09-xx
xxxxx
To Next Page
Loading...
