Program 26 to 35
Xen Topaz Programming Manual 226
PROGRAM 26: ARS SERVICE & LEAST COST ROUTING
26-04: ARS C
LASS OF SERVICE
Description
Use Program 26-04 : ARS Class of Service to set an extension’s ARS Class of Service. Automatic Route
Selection uses ARS Class of Service when determining how to route an extension’s calls.
Input Data
Conditions
None
Feature Cross Reference
♦ Automatic Route Selection
Telephone Programming Instructions
To enter data for Program 26-04 (ARS Class of Service):
1. Enter the programming mode.
2. Enter 26 04
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Extension Number
Max. 4 digits
Prog. No. Day/Night Mode Class
Default
Related
Program
26-04-01
1-8
0-16 0
26-04-01 TEL200
Mode1 :COS 0
26-04-xx TELxxxx
xxxxx
To Next Page
Loading...
