NEC Xen Topaz - Internal Paging Group Settings

Program 26 to 35
Xen Topaz Programming Manual 243
PROGRAM 31: EXTERNAL SPEAKER AND INTERNAL PAGING
31-03: I
NTERNAL PAGING GROUP SETTINGS
Description
Use Program 31-03 : Internal Paging Group Settings to assign names to Internal Paging Groups (i.e.,
Page Zones) and to define the splash tone for Internal Paging.
The system shows the names you program on the telephone displays. Use the following chart when enter-
ing and editing text. When using the keypad digits, press the key once for the first character, twice for the
second character, etc. For example, to enter a C, press key “2” three times. Press the key six times display
the lower case letter.
Input Data
IN
SA
SB
Key
Number of Key Presses
1 2 3 4 5 6 7 8 9 10 11 12 13
1 1 @ [ \ ] ^ _ ` { | } → ←
2 A B C a b c 2
3 D E F d e f 3
4 G H I g h i 4
5 J K L j k l 5
6 M N O m n o 6
7 P Q R S p q
r s 7
8 T U V t u v 8
9 W X Y Z w x y z 9
0 0 ! “ # $ % & ’ ( )
* * +
, - . / : ; < = > ?
#
LND
Move the cursor to the left
OPAC
Move the cursor to the right
CONF
Clear the character entry to the left, one character at a time (Backspace Key)
CLEAR
Clear all the entries from the point of the flashing cursor and to the right.
-Not Used -
Internal Paging Group Number
1-32
Prog. No.
Item
Input Data Default Description
31-03-01
Internal Paging
Group Name
Up to 12 Characters see
“Default”
Assign names to Internal Paging
Groups (i.e., Page Zones). The system
shows the names you program on the
telephone displays.
31-03-02
Internal Paging
Splash Tone
0 : Ordinary Volume
1 : Mute
2 : No tone
0 Allow an extension to have normal (0),
muted (1) or no (2) Internal Paging
alert beeps before a Paging announce-
ment.