NEC Xen Topaz - Page 251

Program 26 to 35
Xen Topaz Programming Manual 244
PROGRAM 31: EXTERNAL SPEAKER AND INTERNAL PAGING
31-03: I
NTERNAL PAGING GROUP SETTINGS
Default
Conditions
None
Feature Cross Reference
♦ Paging, Internal
Telephone Programming Instructions
To enter data for Program 31-03 (Internal Paging Group Settings):
1. Enter the programming mode.
2. Enter 31 03
3. Enter the number of the item you want to program.
4. Select the Internal Paging Group number to be Programmed by pressing the FLASH or the VOLUME▲
or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Program Number Internal Paging Group Name
31-03-01
Internal Paging Group Name
1 Group 1
2 Group 2
: :
32 Group 32
31-03-01Paging1
Name-Group 1
31-03-xxPagingxx
xxxxx