NEC Xen Topaz - System Options for Virtual Extensions

Program 16 to 20
Xen Topaz Programming Manual 119
PROGRAM 20: SYSTEM OPTION SETUP
20-04: S
YSTEM OPTIONS FOR VIRTUAL EXTENSIONS
Description
Use Program 20-04 : System Options for Virtual Extensions to set up various system options for Virtual
Extensions.
Input Data
Conditions
None
Feature Cross Reference
♦ Multiple Directory Number / Call Coverage
Telephone Programming Instructions
To enter data for Program 20-04(System Options for Virtual extensions):
1. Enter the programming mode.
2. Enter 20 04
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Prog.
No.
Item Input Data Default
Related
Program
20-04-01
The virtual extension operation
mode
when answered incoming call
0 : Release virtual extension
after answered incoming call
1 : Holding a virtual extension
after answered incoming call
0
20-04-02 -Not Used- -
- -
20-04-03 Call Coverage Delay Interval
Multiple Directory Number/Call
Coverage Keys set for Delayed
Ringing (see Program 15-11) ring
the covering extension after this
interval.
0 – 64800(sec)
10 15-11
20-04-01
V-Ext Answer 0
20-04-xx
xxxxx